How to Use a Diesel Heater User Manual

How to Use a Diesel Heater User Manual

The diesel heater is a great addition to vehicles or a home for extra heat and for pre-heating engines or defrosting windows.diesel heater user manual However, it requires diesel fuel and 12V battery voltage to operate. Here are a few tips to keep in mind when using your diesel heater:

Check all of the connections and hoses for damage or leaks. The hoses may loosen or wear over time, especially after extended periods of use. If the hoses are leaking, they should be replaced. The hoses should be installed at least 2m away from the vehicle engine, and all connections must be secured to prevent vibration or movement.

Make sure the air intake duct is not blocked and that the nozzle is not covered. It is important that the nozzle receives circulating, clean air to ensure proper combustion. It is also important to maintain a proper distance between the heater and vehicle engine, and that all of the connections and hoses are properly secured to prevent vibration or noise from damaging the vehicle.

When the heater is turned off, it will run through a shutdown and cool down cycle that can take between 3 to 5 minutes. This is an essential part of the process to prevent excess smoke from the exhaust and carbon build up in the chamber that could eventually decrease heating efficiency.

During the initial start up, the fuel pump will run for about 1 minute to preheat and warm the glow plugs. Once this is done, the fuel pump will begin to automatically pump diesel until “Po” is displayed on the first screen. When the fuel tank is below 20%, it is necessary to stop the pump and manually refuel the unit. This will prevent the heater from burning out and requiring a full repriming. Also, be sure to check the fuel level regularly and top up when needed.

Tags:combi heater